The Benefits of Ceramic Bearings for Stihl and Husky Chainsaws – Dominant Saw

The Benefits of Ceramic Bearings for Stihl and Husky Chainsaws

Posted by Bill Lockwood at

Few modifications can compete with the value and performance increase that hybrid ceramic bearings can provide. Many mods such as porting a saw for max rpm can be detrimental when working the saw. An RPM saw might have less torque than one tuned for torque - maybe your saw is huge and power isn't the problem but speed in the wood is, sure make it speedy. That said, not all saws benefit from the same mods. A hybrid ceramic bearing is great for every saw, it doesn't build heat with load, so no matter how hard you work it, the bearings are just chilling. Jump to the bearings here.

We've spec'd our bearings for use in the harshest chainsaw environments, and in sizes to fit most of the Stihl and Husky saws out there. Watch this post for added videos and tips on ceramic hybrid bearings.


Share this post with other cutters

Newer Post →

  • Hello! I have a 346 xp what parts would be required to have it produce more power ? I would also like to visit your shop in the future,I am from Ste-Martine Québec wich is not to far from Burlington.

    Georges Rochefort on

Leave a comment

Please note: comments must be approved before they are published