Ceramic Hybrid Chainsaw Main Bearing Set for ported woods and hot saws – Dominant Saw
Menu
Cart
Set Dominant Ceramic Hybrid 6202 Main Bearings

Set Dominant Ceramic Hybrid 6202 Main Bearings

  • $ 80.00
  • Save $ 20.00


Your build is never complete unless you know what's inside the case. The bearings and the piston take the majority of the abuse in your saw. And, resisting heat build up cut after cut is a saw's fountain of youth.

Hybrid ceramic mains blend the best of both worlds, optimum durability and unequivocal performance. We spec these bearings with chrome steel outer races because we know the outers take the brunt of the force when you put them in. The balls, however, are Si3N4 ceramic. Ceramic balls are 70% smoother than steel, spec'd to ABEC-5 tolerance, and good for rpm well past the mid 30's. This is the most badass chainsaw bearing on the market.

INSTRUCTIONS HERE

Ceramic balls, when compared to chrome steel balls:

  • 60%+ lighter
  • 50%+ stiffer
  • 70%+ smoother
  • More than 100% better rolling contact fatigue life
  • Much, much, harder than steel balls

Stainless steel bearing retainers round out the package. Overall friction is more than 10% less than an all-steel bearing of the highest quality. We've seen an increase in 500 free rpm on a Husky 357. This translates into speed in the wood, under load.

This the known list of what these bearings will fit. "Credited" to Scott and Levi at  www.chainsawr.com If you don't see your bearing listed in the drop-down menu, just select a saw of similar displacement. We are mainly just trying to keep track of what saws these are going in.

Fits:

Stihl:

034/  036 Flywheel side
038 Flywheel side
O28 Clutch side
044 / 046 Flywheel side
048 Flywheel side
021
023
025
MS210
MS230
MS250
041
042

Husqvarna 570, 575 xp, 365, 362 special, 371, 372xp + xtorq, 372, 372k, k750, 143 R, 153 R, 357xp, 357 xp, 359, 51, 55, 50, 266, 266SE, 266XP, 266SG, 61, 268, 268xp, 272, 272xp, 55 rancher, 262, 262xp, 261, 261xp, 380, 480, 40, 45, 49, 350, 353, 346xp (PTO only), 77, 77L, 66 (flywheel and pto side)

Jonsered: 2171 Turbo, 2071 Turbo, 2063, 2165, 2165 Turbo, 2065, 2172 Turbo, 625, 630, 670, 2159, 490, 590, 2051, 5054, 2055, 2041, 2045, 2050, 2153, 2152, 2150 (flywheel and pto side)

Partner: 500, 5000 (flywheel and pto)

Dolmar: 112, 114, 117, 119, 120, 120S, 113, 116, 116si, 120si, 6000i, 6800i (flywheel and pto side)

And many, many, other European made chainsaws 40cc-90cc

Also fits a number of mopeds! Sachs, Batavus, Solex, Vespa crankshaft, Piaggio, Minarelli Countershaft, Morini M1/M01, Honda Hobbit rear wheel (grease and then transfer your good rubber seals), Honda OHV Gx240-390 balance shaft (karting)

 

 

 


Cutters Like